Adjusting the watch

1. Identify the removable links.
Look for the small arrows on the inside of the bracelet, which indicate which direction the pins should be pushed to remove the links.

2 . Place in the adjustment tool
Place the bracelet into the adjustment tool and make sure the pin is perfectly aligned with the exit hole. Gently push the pin in the direction of the arrow. Make sure everything is lined up properly to avoid bending the pin.

3. Remove the required links.
Remove the desired number of links and then replace the pin in the opposite direction.
If the pin sticks out slightly, use the bottom of the tool or a small hammer to help push it back into place.

.